Home > ROGER'S CRACKERS >

VENTURA BIKE MOUNT WITH WATERPROOF CASE FOR IPHONE
Polaris VENTURA BIKE MOUNT WITH W/P CASE FOR IPHONE 7+/8+, Black, One Size
 
Alternative Views:


Our Price: £39.99
Sale Price: £14.99
Savings: £25.00

Type

Phone Type:


Quantity:  
Description Tech Spec Sizing
 
The Ventura waterproof and drop protection cases have been designed to meet everything the elements can throw at your phone while you are out in the wilds. mountain biking, fell running, canoeing, skiing the list is endless. This not only allows you to take your phone with you on every adventure but actually use it without fear of water damage or breakage. the included bike mount allows you to take the phone with you on any ride and the quick release means you can take it off if you stock for a coffee or leave your bike.

Designed to meet the following standards;
Water and dust ingress; IP68 (3 metres) https://en.wikipedia.org/wiki/IP_Code
Drop Protection (US Military Standard - 2 meters); MIL-STD-810G https://en.wikipedia.org/wiki/MIL-STD-810
The case is made from Polycarbonate and the screen protector from TPU Thermoplastic polyurethane
the combination give you an almost bomb proof case ready for anything.

FYI: This case is not compatible with the Ventura QRS mounting system - for this use the QRS compatible cases

Details
To Mount your phone in the case;
1. Check the seal in the rear of the case is clean and dust free.
2. Place the phone, back down in the rear half of the case and place the transparent half over the top.
3. Makes sure the two halves are aligned
4. Then firmly snap the two halves together starting at one corner and moving around the case until completely fastened.
5. Now check that all of the charger and ear-piece covers are firmly in place.

To Mount the Handlebar clamp;
1. Undo the thumb screw to release one side of the clamp
2. Adjust the position of the lower part of the clamp so that when closed it fits centrally on the bars below the upper part of the clamp
3. Tighten the thumb screw sufficiently to hold the clamp tight on the bars but DO NOT over tighten as it could break the clamp.
4. Mount the phone in the case by locating on to the clip and slide back until the lock engages (listen for the click)
5. Check it's securely in place before riding and periodically keep checking.
5. For added security a lanyard can be fitted at the top of the case and fastened to the bike - this could prove useful if you are on severely rough ground or down-hilling.

Periodically remove the phone from the case and check its still waterproof by snapping the two halves back together with NO phone inside.Gently submerge in a few centimetres of water and leave there for a few minutes. Before you open it check for water inside the case.
Warning: Constant opening and closing of the ear and charging ports will cause wear on the rubber seals so for extended performance try using a QI (wireless charger) and Bluetooth headphones.

Share your knowledge of this product.Be the first to write a review »